Home>Products>Slewing Ring Bearings>161.25.1180.890.11.1503 Standard 5 Slewing Ring Bearings
161.25.1180.890.11.1503 Standard 5 Slewing Ring Bearings
category
Slewing Ring Bearings
Standard 5 161.25.1180.890.11.1503 Bearing SPECIFICATIONS
Welcome to BEARING USA CORP. the 50mm d 161.25.1180.890.11.1503 Standard 5 Slewing Ring Bearings online seller.
- Standard 5
161.25.1180.890.11.1503
- 50mm
- 90mm
- 11.2
- 23mm
- 9500
- 14000
- 0.02 KGS
- Open Type
- BEARING USA CORP.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Information techniques 161.25.1180.890.11.1503 Standard 5 Slewing Ring Bearings
- 50mm
- 90mm
- 11.2
- 23mm
- 9500
- 14000
- 0.02 KGS
- Open Type
- In Stock
- Standard
- 0.57
- Plastic
- 33.8
- 2210ektn9-skf
Standard 5 161.25.1180.890.11.1503 Specifications for Slewing Ring Bearings
62.25.1255.500.11.1503 Standard 5 Slewing Ring Bearings | B:24mm; Cage Type:Plastic; Seals or Shields:Two Rubber Seals; D:62mm; Fatigue Load Rating (kN):0.28; Limiting Speed Rating (r/min):7500; SKU:2305e-2rs1tn9/c3-skf; Dynamic Load Rating (kN):19; Clearance:C3; d:25mm; Availability:In Stock; Static Load Rating (kN):5.4; Weight:0.02 KGS; |
191.20.1250.990.41.1502 Standard 5 Slewing Ring Bearings | F:35 mm; B:12.5 mm; d:30 mm; r, r1,2 min.:0.3 mm; Mass inner ring:0.023 kg; |
11.30.1440.190.11.1503 Standard 5 Slewing Ring Bearings | d:90.000 mm; D:160.0000 mm; Accessories:Two Shields; Basic Static Radial Load Rating Co:108000 N; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:101000 N; Oil Speed Rating Open/Shielded n2:4000 rpm; Grease Speed Rating Open/Shielded n1:3300 rpm; B:30.00 mm; |
230.20.0900.013 Type 21/1050. Standard 5 Slewing Ring Bearings | Oil Speed Rating n2:25000 rpm; Grease Speed Rating n1:0 rpm; Fillet Radius rb:0.10 mm; Fillet Radius ra:0.30 mm; D:35.0000 mm; Basic Static Radial Load Rating Co:4250 N; Basic Dynamic Radial Load Rating C:7610 N; B:10.00 mm; d:17.000 mm; |
161.36.1800.891.41.1503 Standard 5 Slewing Ring Bearings | Weight:0.02 KGS; Clearance:C3; Seals or Shields:Open Type; B:174mm; Availability:In Stock; SKU:23252-b-mb-c3-qbl; Cage Type:Brass; d:260mm; D:480mm; |
162.25.0980.891.21.1503 Standard 5 Slewing Ring Bearings | Availability:In Stock; Clearance:C3; Static Load Rating (kN):1530; Weight:19.80 KGS; SKU:24130ce4c3-nsk; B:100mm; Dynamic Load Rating (kN):890; d:150mm; Cage Type:Steel; D:250mm; Oil Limiting Speed (r/min):1400; Seals or Shields:Open Type; Grease Limiting Speed (r/min):1100; |
92.35.1704.991.41.1502 Standard 5 Slewing Ring Bearings | Limiting Speed Rating (r/min):5000; B:46mm; Seals or Shields:Open Type; d:60mm; SKU:2312-tvh-fag; Dynamic Load Rating (kN):89; Fatigue Load Rating (kN):1.74; D:150mm; Weight:2.58 KGS; Static Load Rating (kN):28; Clearance:Standard; Availability:In Stock; Reference Speed Rating (r/min):8000; Cage Type:Plastic; |
91.30.1415.991.21.1502 Standard 5 Slewing Ring Bearings | α:124 °; Tolerance housing:H7; a:3.5 mm; Permissible sliding velocity v min.:0 m/s; Specific static load factor K0:45 N/mm²; Permissible sliding velocity v max.:0.5 m/s; Coefficient of friction µ max.:0.15; B1:10 mm; Mass bushing:3.9 kg; Specific dynamic load factor K:25 N/mm²; D1:205 mm; d:170 mm; D:190 mm; h:172 mm; B:70 mm; Tolerance shaft:e7; Coefficient of friction µ min.:0.08; |
62.25.1180.001.21.1504 Standard 5 Slewing Ring Bearings | D:120mm; Dynamic Load Rating (kN):80.6; Cage Type:Steel; Seals or Shields:Two Rubber Seals; Clearance:C3; Fatigue Load Rating (kN):3.1; B:38.1mm; d:65mm; SKU:3213a-2rs1/c3mt33-sk; Weight:0.02 KGS; Static Load Rating (kN):73.5; Limiting Speed Rating (r/min):3600; Availability:In Stock; |
161.25.0980.891.21.1503 Standard 5 Slewing Ring Bearings | A2:273.05 mm; Labyrinth ring:2 x LOR 168; Cap bolt recommended tightening torque:271.2 N·m; J1:114.3 mm; Stabilizing ring:2 x 36053-140; P180°:113 kN; A1:190.5 mm; R2:42.069 mm; PG:1/4 NPT; Cap bolt:4 x 7/8-9 UNC; Initial grease fill:1672.65 g; Max. speed for PosiTrac Plus seal:725 r/min; Mass pillow block:153 kg; h:57.15 mm; P150°:94.3 kN; H2:79.375 mm; End plug (suffix Y):EPR 23; J min.:549.275 mm; |
No. | Brand | B | a | H | A | s | S | R | K |
61.30.1500.200.11.1504 | Standard 5 | 21mm | - | - | - | - | - | - | - |
91.20.1006.991.21.1503 | Standard 5 | 57.531 mm | 40.826 mm | - | - | - | - | - | - |
60.25.1355.575.11.1403 | Standard 5 | 49 mm | - | - | - | - | - | - | - |
232.21.1075.013 Type 21/1200.2 | Standard 5 | 50 mm | 3 mm | - | - | - | - | - | - |
91.30.1607.991.21.1502 | Standard 5 | 21 mm | - | - | - | - | - | - | - |
281.30.1300.013 Type 110/1500.1 | Standard 5 | 16.00 mm | - | - | - | - | - | - | - |
230.20.1000.013 Type 21/1200. | Standard 5 | - | - | 338.137 mm | - | - | 4.763 mm | - | - |
62.25.1077.304.21.1504 | Standard 5 | 29.00 mm | - | - | - | - | - | - | - |
12.25.1600.000.11.1503 | Standard 5 | 114 mm | - | - | - | - | - | - | 9 mm |
280.30.0900.013 Type 110/1100. | Standard 5 | 20mm | - | - | - | - | - | - | - |
162.28.1400.890.11.1503 | Standard 5 | 16mm | - | - | - | - | - | - | - |
12.30.1381.000.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
12.20.1085.001.21.1504 | Standard 5 | 104mm | - | - | - | - | - | - | - |
162.28.1500.890.11.1503 | Standard 5 | 22mm | - | - | - | - | - | - | - |
91.35.1704.990.11.1502 | Standard 5 | 14.00 mm | - | - | - | - | - | - | - |
92.25.1502.990.11.1503 | Standard 5 | 63.50 mm | - | - | - | - | - | - | - |
12.30.1800.001.41.1503 | Standard 5 | 33mm | - | - | - | - | - | - | - |
62.50.1800.001.49.1504 | Standard 5 | 195 mm | - | - | - | - | - | - | 12 mm |
62.20.1094.500.01.1503 | Standard 5 | 67mm | - | - | - | - | - | - | - |
60.25.1455.575.11.1403 | Standard 5 | 32mm | - | - | - | - | - | - | - |
191.20.1800.990.41.1502 | Standard 5 | 56mm | - | - | - | - | - | - | - |
280.30.1000.013 Type 110/1200. | Standard 5 | - | - | - | - | - | - | - | - |
161.25.1077.890.11.1503 | Standard 5 | 226mm | - | - | - | - | - | - | - |
62.25.0886.109.21.1504 | Standard 5 | 10.00 mm | - | - | - | - | - | - | - |
61.25.0980.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
161.25.1180.890.11.1503 Standard 5 Slewing Ring Bearings Video
Standard 5 161.25.1180.890.11.1503 INTERCHANGE
Slewing Ring Bearings Part series 161.25.1180.890.11.1503 is a potential replacement for these common bearing part numbers:
161.25.1180.890.11.1503
161.25.1180.890.11.1503
161.25.1180.890.11.1503
161.25.1180.890.11.1503
161.25.1180.890.11.1503
161.25.1180.890.11.1503
161.25.1180.890.11.1503
161.25.1180.890.11.1503
Contact Us
- BEARING USA CORP.
- Address1600 E. Bishop Court, P.O. Box 7604,Mount Prospect, IL 60056-7604, U.S.A.
- Phone(Working Time)294-5698
- Fax
Slewing Ring Bearings CATEGORIES
- Angular Contact Ball Bearing
- Automotive Bearing
- Ball Bearing
- Bearings for Oil Production
- Bicycle bearing
- Brand Bearings
- Bushing
- CARB toroidal roller bearing
- ceramic bearing
- Chrome Steel Ball
- 6202 2rs Bearing
- Ucp206 Bearing
- 6005 Bearing
- 6203rs Bearing
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Super Precision Bearings
- Super Precision Angular Contact Bearings
- Super Precision Bearing
- Slewing Ring
- Thrust Cylindrical Roller Bearing
- Four-Row Tapered Roller Bearing
- Spherical Roller Bearings
- Thrust Ball Bearings
- Double Row Tapered Thrust Roller Bearings
- Railway Rolling Spherical Roller Bearings
- Gates Belt
- K080825 Belts
- Gates Racing Timing Belt
- Poly Belts
- V Drive Belts