22315 EAE4 Bearing 75x160x55mm

Min. Housing Shoulder Dia., Outer (Lo):420.0; Max Speed (Oil) (X1000 RPM):2; Static Load Rating (Cor):1,417,000; Width (B):74.0000; Outer Dia (D):460.0000; Dynamic Load Rating (Cr):884,000; Outer Diameter (mm):460; Bore Dia (d):300.0000; Radius (min) (rs):4.000; Max. Shaft Shoulder Dia. Inner (Li):3

Calculation factor - Y0:0.38; db - min.:17 mm; Calculation factor - Y2:0.87; Calculation factor (back-to-back, face-to-face) Y2:1.41; Attainable speed for grease lubrication:75000 r/min; dn:21.9 mm; Db - max.:30.6 mm; Bore Diameter (mm):32; ra max.:0.3 mm; Calculation factor - Y1:0.92;

Calculation factor - kr:0.07; B:118 mm; Mass bearing:105 kg; Limiting value e:0; Da - max.:585 mm; D1:552 mm; D1 ≈:552 mm; Calculation factor kr:0; Basic static load rating - C0:4250 kN; d1 ≈:495 mm;

Cage Material:Steel; Superseded Part:23122KCJW33C3; Reference Thermal Speed Rating (Grease):2500; Cg - Geometry Factor8:0.0716; Bearing Weight:5.6 Kg; d:110 mm; Design Unit:METRIC; C1(2) - Dynamic Radial Rating (Two-Rows):518000 N; Reference Thermal Speed Rating (Oil)7:2900; C0 - Static Radial Ratin

series:60; Weight:4,08 Kg; Category:Single Row Ball Bear; Min operating temperature, Tmin:-20 °C; bore type:Round; finish/coating:Uncoated; maximum rpm (grease):2800 rpm; Enclosure:Open; UNSPSC:31171504; Outer Race Width:1.378 Inch | 35 Mill;

Limiting Speed - Oil:5,000 rpm; Cy:5.4 mm; Static Load Rating:58,500 N; Enclosure:Snap Ring Groove wit; da:69 mm; Fillet Radius/Chamfer:1.5 mm; B:36.5 mm; ra:1.5 mm; Weight:1.360 kg; a (max):3.3 mm;

r min.:3 mm; Brand:KOYO; Da max.:212 mm; B:77 mm; Calculation factor (e):0.36; Weight:14.3 Kg; C:77 mm; D:225 mm; Basic static load rating (C0):78.0 kN; Calculation factor (Y0):1.83;

E:341 mm; Piston Length of Travel:12 mm; Piston Area:21100 mm²; Assembly Weight:22.000 Kg; D:49.00 mm; E1:282 mm; Threads B:Tr280x4; C:380.0 mm; A:9 mm;

Width (mm):38,5; Size (mm):85x150x38.5; d:85 mm; C:30 mm; Bore Diameter (mm):85; Brand:FAG; Outer Diameter (mm):150; Bearing number:F-805576.02; D:150 mm; B:36 mm;

da - Cone Frontface Backing Diameter:183.90 mm; Y - ISO Factor9:1.29; C0 - Static Radial Rating:295000 lbf; Ab - Cage-Cone Frontface Clearance:4.8 mm; Da - Cup Frontface Backing Diameter:288.50 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:234000 lbf; Db - Cup Backface Backing Diameter:278

Bore Diameter (mm):24; Outer Diameter (mm):32; Brand:IKO; D:32 mm; C:20 mm; Size (mm):24x32x20; Fw:24 mm; Da max.:30 mm; Bearing number:TAF 243220; Weight:0,0405 Kg;

Bearing number:PW28610042CS; B:42 mm; Width (mm):42; Brand:PFI; C:42 mm; Bore Diameter (mm):28; Outer Diameter (mm):61; d:28 mm; Size (mm):28x61x42; D:61 mm;

C0 - Static Radial Rating:258000 lbf; d:11.0000 in; Design Units:Imperial; Ab - Cage-Cone Frontface Clearance:0.14 in; Cone Part Number:L555233; Cage Type:Stamped Steel; da - Cone Frontface Backing Diameter:11.65 in; Aa - Cage-Cone Backface Clearance:0.18 in; G2 - Heat Generation Factor (Rib-Roller

D:300 mm; Weight:20,0 Kg; D1:236 mm; Width (mm):22; B:22 mm; Size (mm):220x300x22; d1:231 mm; d:220 mm; H:96 mm; Outer Diameter (mm):300;

Max Grease Speed:1700; Material :Cast Iron; Cage Type:EJ; Housing Mass:34.0 Kg; J:380.00 mm; Max Oil Speed:1900; C0 Static Load Rating:1170; Jmin:373 mm; G:M24; Seal:VR226;