16mm Chrome Steel Balls G10

Max Bearing Speed:5000 rpm; Brand:Baldor-Dodge; Seal Type:Single Lip; Housing Material:Cast Iron; Bearing Locking Device:Setscrew; Base to Center Height:Not Applicable; Bearing Bore Shape:Round; Housing Type:2 Bolt Flange; Self Aligning:Self Centering; Bearing Outer Ring Material:Steel;

H:75 mm; Designation of bearing:EX310G2L3; T min.:-20 °C; B1:66.6 mm; N:20mm; d1:76.2 mm; C:62 kN; J:212 mm; T max.:100 °C; Recommended tightening torque for set screw:22 Nm;

T min.:-40 °C; Recommended tightening torque for set screw:8 Nm; d:36.51 mm; e:19 mm; Designation of bearing:UC207-23G2T04; H:161 mm; A2:44.4 mm; N:16mm; L:90 mm; T max.:100 °C;

J:130 mm; C:43.55 kN; Designation of bearing:UC211-35G2; G:R1/8"; Designation of housing:FE211N-; A:48.5 mm; T min.:-20 °C; S:22.2 mm; s1:27.8 mm; C0:29.2 kN;

d:38.1 mm; N:M14; Weight:1.85 kg; Z:68.4 mm; H2:100 mm; Designation of bearing:UC208-24G2; B:49.2 mm; Designation of housing:PA208N-; J:84 mm; Designation of open end cover:SCOU208-24;

J:78 mm; Designation of housing:FCE203-; d1:27.2 mm; B1:28.6 mm; L:100 mm; s1:23 mm; d:12 mm; e:2 mm; A1:8 mm; H3:62;

H:57.2 mm; d:50 mm; C0:23.2 kN; A:54 mm; Dz:100 mm; S:11 mm; H1:21.5 mm; J:158 mm; Z:91.5 mm; T min.:-20 °C;

T min.:-20 °C; N:M14; A1:27 mm; G:M6x1; C0:15.2 kN; T max.:100 °C; B:42.9 mm; H:47.6 mm; H1:13 mm; s1:21.45 mm;

e:10 mm; d:25.4 mm; A4:21 mm; L:115 mm; A2:29.5 mm; N:12mm; C0:7.88 kN; s1:13.5 mm; J:90 mm; Designation of housing:FC205N-;

Grease Type:Unirex N2; Seal Type:Single Lip; Bearing Series:205 Series; Housing Material:Cast Iron; Ship Weight:1.78 LB; Expansion Type:Non-Expansion; Housing Coating:Powder Coat; Retainer Type:Std Retainer; End Cap Groove:Yes; Brand:Baldor-Dodge;

T min.:-40 °C; A1:13 mm; A:40 mm; Recommended tightening torque for set screw:8 Nm; C0:20.8 kN; G:R1/8"; S:10.2 mm; Weight:2.32 kg; e:24 mm; d:42.86 mm;

C0:20.8 kN; N:16mm; d:44.45 mm; Dz:95 mm; Recommended tightening torque for set screw:8 Nm; J:132 mm; L:160 mm; B:49.2 mm; C:31.85 kN; A2:40.2 mm;

Bearing Insert Material:Steel; Retainer Material:Nylon; Flinger Material:Steel; Bearing Inner Ring Material:Steel; Grease Type:Unirex N2; Base to Center Height:Standard; End Cap Groove:No; Ball Material:Steel; UPC:782475324378; Bearing Duty:Normal Duty;

C:52.5 kN; A5:39.7 mm; S:25.4 mm; s1:32.55 mm; d:57.15 mm; Designation of housing:C212-; T max.:100 °C; C0:32.8 kN; Designation of bearing:UC212-36G2T04; SW:4.76 mm;

Characteristic cage frequency, FTF:0.43 Hz; B:14.73 mm; D:50.29 mm; Fatigue limit load, Cu:4.15 kN; Nlim (grease):7,400 rpm; ra max:1.3 mm; Y0:0.88; a:10.82 mm; e:0.37; T:14.22 mm;