- BEARING USA CORP.
- Angular Contact Ball Bearing Automotive Bearing Ball Bearing
English
Home>Products>Angular Contact Ball Bearing>IR-8014 Bearing 30×65×21mm
IR-8014 Bearing 30×65×21mm
category
Angular Contact Ball Bearing
IR-8014 Bearing 30×65×21mm SPECIFICATIONS
Various Angular Contact Ball Bearing types BEARING USA CORP. 62,8 Width (mm) and 49.2125x90x62.8 sizes to accommodate your IR-8014 Bearing 30×65×21mm requirements.
S71913
- 49.2125x90x62.8
- 90 mm
- 62,8
- Insert Bearings Sphe
- Wide Inner Ring
- 24,6 mm
- Bearing
- 8482.10.50.00
-
BEARING USA CORP.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
IR-8014 Bearing 30×65×21mm Sponsored Products Related To This Item
- 49.2125x90x62.8
- 90 mm
- 62,8
- Insert Bearings Sphe
- Wide Inner Ring
- 24,6 mm
- Bearing
- 8482.10.50.00
- 6,9 mm
- G1115KRRB
S71913 IR-8014 Bearing 30×65×21mm Characteristics
| No. | Brand | D | u | r | c | o | n | B | e |
| 315 | - | - | - | - | - | - | - | - | - |
| 2020 | - | 83,058 mm | - | - | - | - | - | 25,4 mm | - |
| KSO-G02-2BP-10 | DAIKIN | 28 mm | - | - | - | - | - | - | - |
| #32216A | fag | - | - | - | - | - | - | - | - |
| D7E | - | - | - | - | - | - | - | 8 mm | - |
| Nmrv90 | - | 80 mm | - | - | - | - | - | 18 mm | - |
| 1220*2440 | - | 42 mm | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 505 | - | - | - | - | - | - | - | 43 mm | - |
| jtc166 | TRW | - | - | - | - | - | - | - | - |
| 703-08-12122 | - | 110 mm | - | - | - | - | - | 40 mm | - |
| E320V2 | - | - | - | - | - | - | - | - | - |
| (10pcs) | - | - | - | - | - | - | - | 6 mm | - |
| M-86610 | Bower | - | - | - | - | - | - | 100 mm | - |
| 1250 | NTN | 63 mm | - | - | - | - | - | - | - |
| 6162-38-3041 | - | 22 mm | - | - | - | - | - | - | - |
| 26882#3 | Timken | 180 mm | - | - | - | - | - | 60 mm | - |
| NNF5009ADA2LSV | SKF | - | - | - | - | - | - | 56 mm | - |
| 50% | - | - | - | - | - | - | - | - | - |
| 1994 | - | 400 mm | - | - | - | - | - | 78 mm | - |
| Hy63y | - | - | - | - | - | - | - | - | - |
| 755 | Timken | 0.604 in | - | - | - | - | - | - | - |
| 58001 | - | - | - | - | - | - | - | - | - |
| (PAC-01) | - | - | - | - | - | - | - | - | - |
| 0.1mm | - | - | - | - | - | - | - | - | - |
| ZX470-3 | - | - | - | - | - | - | - | - | - |
| 7205C/AC DBL P4 Angular Contact Ball Bearing (25x52x15mm) | Designation SKF:VKBA 685; Brand:SNR; Designation Ruville:5812; Designation FAG:713690170; Designation SX:CX146; Compatibility:FIAT / 128 / engine; Bearing number:R158.12; |
| 7306A Angular Contact Ball Bearing 30x72x19mm | Designation SX:CX019; Compatibility:MERCEDES / 190 / en; Designation SKF:VKBA 756; Brand:SNR; Designation FAG:713667450; Designation Ruville:5108; Bearing number:R151.08; |
| ZARN45105TN Bearing 45mm×105mm×82mm | A2:19 mm; Bore Diameter (mm):33,3375; d:33,3375 mm; Weight:1,3 Kg; S:17,5 mm; L:90 mm; Bolt (G):M8; Bearing number:UCFB207-21; Brand:FYH; A:33 mm; |
| 7000ACE/P4A Bearings 10x26x8mm | Size (mm):200x250x37; Width (mm):37,000; Brand:NTN; d:200,000 mm; Outer Diameter (mm):250,000; D:250,000 mm; T:37,000 mm; Bearing number:81140; Bore Diameter (mm):200,000; |
| 30TAC62B Bearing | Brand:KOYO; B:13 mm; Basic static load rating (C0):5,45 kN; Da max.:37 mm; Bore Diameter (mm):15; C:13 mm; da min.:20 mm; (Grease) Lubrication Speed:17000 r/min; Bearing number:6302-2RU; D:42 mm; |
| VEX15/NS7CE1 Bearings 15x32x9mm | Calculation factor (e):0,37; Basic dynamic load rating (C):27,7 kN; D:50,292 mm; Da min:43,5 mm; Outer Diameter (mm):50,292; Weight:0,113 Kg; r1 min.:3,6 mm; Size (mm):29x50.292x14.224; Brand:ZVL; B:14,732 mm; |
| BEAS 025057-2RS Angular Contact Thrust Bearing 25x57x28mm | Size (mm):25x37x16; Ew:32 mm; C:16 mm; Outer Diameter (mm):37; d:25 mm; Fw:25 mm; D:37 mm; B:16 mm; Brand:ISO; Bore Diameter (mm):25; |
| 55TAB10DT Ball Screw Support Bearing 55x100x40mm | Oil Lubrication - B/C/O Seal:1200 rpm; Dimension BC:7.88 in; Oil Lubrication - M/N Seal:1500 rpm; Dimension RV:0.19 in; Pre Install Clearance Min:0.095 mm; Shaft Size :2-3/4 in; Eng Internal Radial Clearance - Max:0.0055; Shaft Size Type:Imperial; Dimension F:9.5 in; Oil Lubrication - T Seal:2650 rpm; |
| 71914 71914AC Angular Contact Ball Bearing 70x100x16mm | Bore Dia (d):5.0000; Bearing Type:sealed; Bore Diameter (mm):127; Inner Width (Bi):4.3750; Mis-alignment Angle (a deg.):6; Max. housing corner radius, or 45 deg. chamfer (ch):0.040; Weight (g):13,500.00; Outer Width (Bo):3.7500; Dynamic Load Rating (Cr):314,713; Static Load Rating (Cor):932,899; |
| FAG 7319-B-TVP Bearings | E:262 mm; B:82,6 mm; Brand:Timken; r max:2,5 mm; D:280 mm; Bearing number:180RF91; Outer Diameter (mm):262; F:197 mm; d:180 mm; Bore Diameter (mm):180; |
IR-8014 Bearing 30×65×21mm Video
Contact Us
- BEARING USA CORP.
- Address1600 E. Bishop Court, P.O. Box 7604,Mount Prospect, IL 60056-7604, U.S.A.
- Phone(Working Time)294-5698
- Fax
Angular Contact Ball Bearing CATEGORIES
- Angular Contact Ball Bearing
- Automotive Bearing
- Ball Bearing
- Bearings for Oil Production
- Bicycle bearing
- Brand Bearings
- Bushing
- CARB toroidal roller bearing
- ceramic bearing
- Chrome Steel Ball
- 6202 2rs Bearing
- Ucp206 Bearing
- 6005 Bearing
- 6203rs Bearing
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Super Precision Bearings
- Super Precision Angular Contact Bearings
- Super Precision Bearing
- Slewing Ring
- Thrust Cylindrical Roller Bearing
- Four-Row Tapered Roller Bearing
- Spherical Roller Bearings
- Thrust Ball Bearings
- Double Row Tapered Thrust Roller Bearings
- Railway Rolling Spherical Roller Bearings
- Gates Belt
- K080825 Belts
- Gates Racing Timing Belt
- Poly Belts
- V Drive Belts
17 mm x 40 mm x 12 mm VEB35/NS7CE1 Bearings 35x55x10mm
45 mm x 100 mm x 25 mm 71907CE/P4A Bearings 35x55x10mm
20 mm x 42 mm x 12 mm 7006CE/HCP4A Bearings 30x55x13mm
VEB30/NS7CE3 Bearings 30x47x9mm
VEB25/NS7CE3 Bearings 25x42x9mm